How to place an ad


 

These ads are posted as a service to club members.
IAOC does not endorse, verify or support any of the claims or content in these postings

 

Listing of Vendors: (click to jump to ad or just scroll on down!)


Amphicar Parts - Moldings       Midwest Amphicar - Sheetmetal   

Gordon Imports, Inc - everything     John Capone - Clothing

John "Cruiserduck" Lambert - Patches       Eddie Dillard - Custom Axles & Props

Amphicar Parts - Misc    Amphicar.CA - everything     

John Friese - High Performance Clutch/Drain Plug       Bernhard Schatt - Various (in Germany)

Victor Nelson - Patches         Peter Fredsall - Videos/Postcards

Midwest Amphicar - Transmission Repair         Great Lakes Amphicar        Tips

 


For Sale - Custom CV-Joint Driveshafts & Aluminum Props w/ Nuts

 


click image for larger view

Amphicar CV Axles $1,550.00 per set
includes shipping 48 states
Cores required


Amphicar reproduction props and prop nuts
In aluminum
$650.00 per set includes 2 props and 2 nuts.

Amphicar fuel injection that works!!!
Call to inquire


Eddie Dillard
ph: 407-865-1182
email:
amphicar@yahoo.com

 

 

 

Back to Vendor Listing


 

 

 

 

 

 

 

 

 

 

 

 

For Sale - Brand new aluminum moldings-thin style

These moldings have the same profile as the original and are finished in bright dip anodizing just as the originals were.

Each piece has been fitted to an actual Amphicar for a correct fit.

ABOUT THESE MOLDINGS;

Here is an alternative to the Stainless Steel molding soon to be available elsewhere. There were several thicknesses of molding made for the Amphicar. This is the thin style.

We started off by having a die designed to extrude the aluminum. Twenty foot long extrusions were made and the metal was annealed to make it soft for bending. Next, the pieces were formed with dies and bucks (forms). Each piece was then hand fitted to my project car. Also, two donated rear fins were mounted on stands and used to fit the long rear fender pieces. Pieces with extra long ends are also available if you feel your car is out of the norm and you don't mind trimming the ends. We then had the metal heat treated to put the strength (what little there is) back in. Lastly, the pieces have been polished and anodized in bright dip which was the original finish.

For more information 
please contact us;
Email ampicarparts@earthlink.net
and leave your contact information

More parts available at WWW.amphicarparts.com

Phone 310-466-6288
HEADLAMP SURROUND MOLDING 

LEFT - part number 12-46-1a
RIGHT - part number 12-46-1b

$42 ea

REAR LAMP SURROUND MOLDING


LEFT - part number 12-46-2a
RIGHT - part number 12-46-2a

$46 ea

HOOD (TRUNK) MOLDING 

part number 12-46-4
$35 ea
REAR FIN MOLDING

LEFT - part number 12-46-3a
RIGHT - part number 12-46-3b

$69 ea

Back to Vendor Listing

 

 

 

 

 

 

 

 

 

 


Services - Gordon Imports, Inc.

 

YOUR AMPHICAR PARTS SUPPLIER SINCE 1979
Please call, write, fax or email today for a catalog:

GORDON IMPORTS, INC.,  14330 ISELI RD.
SANTA FE SPRINGS, CALIFORNIA 90670 
PHONE 562-802-1608 714-523-3512  FAX 562-404-1904

sales@gordonimports.com

Visit our picture intense website:  www.gordonimports.com.  Download our fabulous weekend specials!  Go for it!  With our Big Project Restoration Packages, your Amphicar will be new and you will save up to 30%!  Call or e-mail now for details!

updated: 12/3/2008


"Hugh"

Back to Vendor Listing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


For Sale - STEEL Amphicar Quarter Panels with Raised Lips & Battery trays

The ONLY Safe Solution!

Why take chances with you prized Amphicar and more importantly, your passengers?

Other materials or thin, rusting 1/4 panels will not resist punctures or cracking upon impact (especially in cold waters) are simply unsafe.

Hand made by Dave himself, so you know they are properly manufactured.

Rear quarter panels with raised lip. 19 gauge. One piece, six feet long.

$400.00 each or $700.00 per pair. - Crating and shipping extra.

From a man who knows what he's speaking about....

"I just saw that Dave (Midwest Amphicar)  is now advertising his raised lip quarter panels on Amphicar.com at $700 + shipping for both sides.  I honestly expected to see them priced at close to twice that amount.  This is more like Mustang part prices than Amphicar.

You could not have these made for that price and there is nothing else on the market that even comes close.  It is not just the lip, being one piece eliminates a big weld line resulting in a stronger, longer lasting unit.  The panel is also contoured as it should be and will not require all of the rework that is needed on the two piece components out there..  Dave does great metal work.   I suggest that every Amphi owner should order a set today, before Dave comes to his senses and raises the price.   Put them away with the rest of your parts stash, if you use your Amphi in the water, (you will need them eventually. - Mike I" (Yahoo Amphicar Lovers Group Admin)

 
finally a steel battery tray that fits.

Awesome 18 gauge steel!

Current tray price $175.00 ea. Crating and shipping extra.

Ribs that meet factory ribs. Look at the graceful curves. All the way to firewall. No UGLY seams at eye level. Extra long goes past rear of car. Matches original, tapers near back then gets larger just like original. All are hand made and will vary slightly.

www.midwestamphicar.com
or call Dave @
815-910-5502

Back to Vendor Listing

 

 

 

 

 

 

 

 

.

 

 

 


For Sale - Amphicar Clothing

Quality Amphicar Clothing
with embroidered Amphicar logos


Some colors or sizes may not be available,
so email or call to see if I have what you need.

 email or call me for shipping costs

John "Cigarman" Capone

bullet

DENIM SHIRTS = $25

bullet

HAND TOWELS = $3

bullet

LEATHER JACKETS = $175

bullet

POLO SHIRTS (all 4 colors) = $25

bullet

FLEECE PULLOVERS =$25

bullet

FLASHLIGHT =$10

  or call my cell at 847-533-7803.

 

 

Back to Vendor Listing

 

 

 

 

 

 

 

 

 

 

 

 


For Sale - Amphicar Patches... Patches? You need some stinkin' PATCHES!

Want to customize that favorite shirt, jacket, hat, etc? now you can by purchasing one of these beautiful Amphicar patches pictured below.

Put 'em on your hat...

These patches are fully embroidered, meaning the entire surface of the patch is completely stitched.  The patches are manufactured using top quality background fabrics custom dyed for uniformity and routinely tested for durability and color-fastness.  A laminated backing is used to maintain their original shape, appearance, and washable, dry-cleanable yarns are used.

Put 'em on your jacket...

The patches also include a heat seal backing so they can be sewed or ironed on any shirt, jacket, hat, etc. 

A price is just $6.00 each, plus $1.00 shipping and handling.

Please submit orders to John Lambert at .  Please include the number of patches requested, your complete mailing address and a check for the total amount plus S&H

For snail mail orders my address is;

John Lambert
19090 Hickory Ridge Rd.
Fenton, Michigan 48430. 

You can also reach me at (810) 750-4967 if you have any questions.

Thank you, John "Cruiserduck" Lambert

Back to Vendor Listing

 

 

 

\

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For Sale - Amphicar Parts

Amphicar Bumpers!  Single- or Two-piece

Newly manufactured to match originals. Stamped, polished and plated in three stages: 1. copper 2. nickel 3. chrome. Only $300 for each half of the two-piece version or $650 for the single-piece.

Shipping has been running about $15.  Please feel free to contact me if you have questions or wish to discuss any details regarding purchase or shipping.

Two-piece new remanufactured Amphicar bumper

Visor Brackets with Visors

New sturdy aluminum brackets with visors in off-white or black. These brackets won't snap off with the first strong breeze like those original super-fragile plastic ones.  Only $160 per pair plus shipping.  I'm proud to boast that these rugged new visor brackets are an Amphipoda Endorsed Product!

New remanufactured Amphicar visors, both white and black are shown.

Amphicar metal fuel line

These are new exact reproductions of the original Amphicar metal fuel line that runs from the fuel pump to the carburetor. The end fitting are machined from solid brass. Each part has been mounted on and tested on a running Amphicar motor. This part fits cars with the original SOLX B30PSEI carburetor. Contact us about supplying fuel lines for the newer replacement carbs such as the B33PSEI as we do have fittings for those models also.

Amphicar Air Filter Element

If you've been to the corner auto supplies joint lately, you'll know that it is now no longer possible to cross the Amphicar air filter with any of the popular brands found on their shelves these days: Not Fram, Wix, Purolator, Napa, etc., etc. 

This economical filter has a microlite filter element and is an exact fit for your Amphicar.  By getting a special batch of these, I am able to pass the savings along to you.  Instead of the $19 charged by specialty parts sources elsewhere, you can have a brand new perfect filter that'll let your Amphi breathe properly for just $12 (plus $3 shipping).  Get a few while you can!

You can learn more about these and lots of other great new remanufactured Amphicar parts and products at www.amphicarparts.com or contact: Allan Woodcock, 442 Vista Dorado Lane, Oak Park, CA 91377. Weekday phone: (310) 466-6288 or email: sales "AT" amphicarparts.com.  Thanks! Allan.

[7/11/2004 rev]


Back to Vendor Listing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

For Sale - High Performance Clutch System & Improved Late Style Drain Plug

If you're tired of the chatter and wear problems inherent with the Amphicar clutch, here is a high performance clutch system that is a drop in replacement for that weak old clutch. No modification is required to anything in the car. It simply bolts in place and will replace that weak, chattering spring clutch system with a high performance diaphragm clutch. After using this system for several thousand miles I removed the engine to check for wear to the clutch system. Absolutely no wear was evident. The system operates smoothly and quietly and doesn't change your clutch pedal pressure. This clutch system is so much stronger than the original that, given reasonable driving, I would expect this to be the last clutch your Amphicar will ever need.

The throw out bearing holder is a drop in replacement for your original unit and it spaces the release bearing in the proper position to operate perfectly in your Amphicar.
The release bearing itself has a hardened, ball bearing supported surface that is designed to operate directly on the forks of a diaphragm clutch pressure plate.
The Triumph flywheel has been resurfaced and balanced. (You cannot use the original Amphicar flywheel)
The pressure plate is a new unit made by Borg & Beck (the maker of the original Amphicar clutch)
The clutch disk is almost 1 inch larger than the original Amphicar disk.

The system consists of:

bullet  A Custom Machined Release Bearing Holder
bullet  Ball bearing type, hardened Release Bearing
bullet  Diaphragm Style Pressure Plate
bullet  Clutch Disk
bullet  Resurfaced and Balanced Flywheel

Just $595 plus shipping for the whole system.
(Partial systems and replacement parts also available. Please call or email for prices.)

New Clutch System.jpg (46597 bytes)

New Throw Out & Holder.jpg (37941 bytes)

Improved Late Style Drain Plug
If you have a late model Amphicar, with the large bilge plug, you know how difficult it is to remove and install and how it often leaks. Here is an improved plug that won't leak and makes removal and reinstallation easy to do without tools. Simply unscrew the wing nut to loosen and remove the plug. When reinstalled, the plug has two positioning pins that engage into the small holes around the bilge opening to lock the plug in place. The metal parts of this plug have been powder coated to eliminate rust problems and rubber parts are installed that aren't attacked by immersion in oil.
Just $36.95 plus $8 shipping
Bilge Plug New 3.jpg (58578 bytes)

To order, send check, money order or pay via PayPal to:

John Friese
242 E. Alamar Ave.
Santa Barbara, CA 93105
Tel. 805-570-4778
Email: jfriese "AT" mindspring.com

[12/9/2008 rev]


Back to Vendor Listing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Great Lakes Amphicar  'No Job too big or small' 

 

Complete restorations, Body repair & mechanical work, complete hull cleaning & storage.

~ reasonable rates ~

[1/9/2009 rev]

Back to Vendor Listing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

 

 

 

 

 

 

 

For Sale - Various Amphicar Parts

The Flag of the European Union

All Amphicar owners are welcome, but European owners will be especially pleased that the following parts are now available from a local source:

bullet

Piston Cup for Front Brake Wheel Cylinder / Manschette für Vorderradbremse (Amphicar Parts List/Ersatzteilliste: Plate 23, Figure No. 13)

bullet

Improved Transmission Mount Kit / Verbessertes Metallgummilager für Getriebe

bullet

Stub Axle Bolt King Pin with Bushes / Achsenschenkelbolzen mit Buchsen (Amphicar Parts List/Ersatzteilliste: Plate 23, Figures No. 34 & 17)

bullet

Stub Axle Bolt King Pin (without Bushes) / Achsenschenkelbolzen (ohne Buchsen) (Amphicar Parts List/Ersatzteilliste: Plate 23, Figure No. 34)

bullet

Stub Axle Bolt King Pin Bushes / Achsenschenkelbolzenbuchsen ohne Donaudampfschifffahrtgesellschaftkapitänsmützengummi (Amphicar Parts List/Ersatzteilliste: Plate 23, Figure No. 17)

bullet

Bush for Oscillating Axle / Buchse für Schwingarm (Amphicar Parts List/Ersatzteilliste: Plate 21, Figure No. 2)

bullet

Bearing Bushes for Axle Tube / Lagerbuchse für Achsrohr (Amphicar Parts List/Ersatzteilliste: Plate 20, Figures No. 17 & 18 and Plate 21, Figures No. 9 & 10)

For more information, please visit http://www.amphicar-schatt.net and choose a language. Bernhard Schatt in Mannheim, Germany.

[9/9/2003]


Back to Vendor Listing

 

 

 

 

 

 

 

 

 

 

 

 

 

For Sale - Amphicar Patches in the 4 factory colors

All patches are from the same computer readout and are on a bright white background. Regular size is approx. 2-5/8" x 3-5/8", ideal for a hat or breast pocket area.

Cost of any of the 4 stock colors exactly as shown are:

bullet

  2-5/8" x 3-5/8" is $18.

bullet

  3-1/2" x 5" (about twice the area) is $24.

 

The embroiderer allows a 50% discount on orders of 50 or more identical patches. With 4 different colors, we will never need that many at one time, as they are ordered a few at a time as they are requested. Consequently, the cost per regular patch is $18. each plus $2 mailing and insurance for each total order. 

If you have questions, e-mail me at: nelson625 "AT" aol.com or telephone: (386) 228-2118.
Please address orders to:

Victor Nelson
800 Hadden Lane
Deltona, Florida 32738.

[5/11/2009 rev]

patches.jpg (45499 bytes)
Click to enlarge:

Back to Vendor Listing

 

 

 

 

 

 

 

 

 

 

For Sale - Various Amphicar Parts in Canada

Amphicar.ca - Gord (1 Hour north of Toronto)

A second choice for all your Amphicar parts needs; and now specializing in complete showroom restorations and repairs to engines, transmissions, brakes, front ends, etc. Interiors manufactured and installed.

Over 700 Parts for Amphicars are now listed in my parts inventory.  From NOS (new old stock) to used, from new tonneau covers and interiors to a few reproduced hard to get transmission gears. so call or email today !   .  .  .  .  1-705-327-2820  .  .  .  .  gord "AT" amphicar.ca

You don't need to shop around, just call me. If I don't have it I will know where you can get it.  Some rarer items may be expensive, but most are very competitive if not downright cheap!

I am fabricating brand new replacement fiberglass body panels for almost the whole car (to see what this entails click here)

Here are the top-o'-the-heap "Specials":

  • TRANSMISSION MOUNTING SETS (BOLT-THROUGH MODIFICATION). This specially manufactured kit provides a rugged improvement over the frail original transmission mounting system, which is prone to failure. 

gordstrannybolts.jpg (13494 bytes)

  • BOOT COVER (Covers the convertible top when folded down). Available in black, white or your custom color. The quality is very good, and the price much better than...  Snaps come in a bag for you to install or can be pre-attached to standard positions if you wish.

tonneau.jpg (33953 bytes)

  • COMPLETE INTERIOR KITS: available in all 4 Original Amphicar colors and also blue. Comes with everything needed to install, including new hardwood in the door panels, with rear backrest already assembled with new foam. Advice also available to get your seat springs ready. . Also available with rear seat Crest ()
  • The Super Kit! Everything in the base kit plus... Fiberglass seat base, soundproofing kit, gray lining kit for under top, boot cover Cover and all new snaps and pins, full rubber floor kit with carpet humps,50 door clips and 2 trim pc.
  • FLOOR RUBBER KITS: All five pieces (with carpet for front wheel wells).
  • FIBERGLASS REAR FENDERS: the complete rear fender from door to back of fin, the later model type with the hump on the bottom, 6 feet 7 inches long by 3 feet high. Can be easily cut just to replace the bottom part, or installed complete with pop rivets and adhesive.  They are very light, but well built. Would be great to make an "Amphi Trailer" too!  More fiberglass parts to follow in future: piece across the bow that holds the headlights, piece across fantail where the license plate and tail lights fasten, front fenders.

Rear fender(lorR)$200.00.jpg (26750 bytes)

  • FIBERGLASS FRONT AND REAR SECTIONS. Exact copies of NOS stock.  Light and strong.  Installs with today's super 2-part adhesives. Click photos for larger view:

ek_2_6.jpg (28931 bytes)
ek_3_6.jpg (26854 bytes)

  • FIBERGLASS SUPPORT PANEL FOR UNDER REAR PASSENGER SEAT. It's thin, light and strong. See optional heat and sound insulation  (also included in the SUPER KIT).

rearseatbase.jpg (48121 bytes)

  • HEAT & SOUNDPROOFING INSULATION FOR SUPPORT PANEL UNDER REAR PASSENGER SEAT. Keep your passengers cool and your ride quiet with this custom-fit soundproofing kit with reflective heat insulation.  Everything you need to modify your existing seat base (spray glue and silver edging tape included), OR, you can get a brand new sturdy fiberglass seat support panel (see above item) with this superb insulation already mounted(also included in the SUPER KIT)

sound proffing.jpg (60428 bytes)

  • HEAT & SOUNDPROOFING INSULATION KIT FOR REAR FENDERS IN ENGINE BAY.  Feeling a little too much like the engine room of a tramp steamer in tropical waters in that Amphi on a warm summer's day?  A heat proofing/soundproof kit for rear fenders in engine bay has been added to the existing soundproofing kit (8 parts) or just for the fenders alone (2 parts and spray glue).  Note: heatproof kit was designed for close quarter boat engines where this product can sometimes be only a inch away from motors. This is silver on both sides with soundproofing in the middle.  It is not waterproof, but the rest of the kit is.  It's grey high density 1 inch foam especially made for soundproofing and easy to work with. I have cut it all out to fit your cars. You get with full kit the piece that goes under the rear seat in front of the tranny, a piece for the rear seat, 2 pieces for under the convertible top boot and 2 pieces for the sides. as well as the 2 heatproof for the rear fenders in engine bay. Click for larger view:

heat profing.jpg (43581 bytes)

  • FIBERGLASS DOOR SKINS.  Click photo for larger view:

doorskin.jpg (22712 bytes)

  • FIBERGLASS INNER DOOR BOTTOMS.  Click photo for larger view:

innerdoorbottom.jpg (26852 bytes)

  • FIBERGLASS FRONT FENDERS, LEFT OR RIGHT.  

front fende(lorR)$190.00.jpg (29873 bytes)

  • FIBERGLASS BOW BELLY.

bellypatch.jpg (18165 bytes)

  • COMPLETE FIBERGLASS SINGLE PIECE FRONT BOW.  Please note that this item is very large and can not be shipped by normal means. Please contact me to discuss possible alternative delivery arrangements if you are interested in this part.  You can see how we made the mold for this item right here.

bow.jpg (19546 bytes)

  • COMPLETE FIBERGLASS FLOOR SECTION.  Complete from front to middle of trans area, (Sorry, it's too big to ship)

  • COMPLETE FIBERGLASS REAR INNER FENDERS.  Includes inner fender from front of wheel well to rear of the floor under the muffler or battery tray.

  • FIBERGLASS HEADLIGHT POTS.

  • FIBERGLASS TIE ROD SHIELD PAN.

tierodshirlds.jpg (30612 bytes)

   
  • FIBERGLASS ROCKER PANEL.

glass rocker(R).jpg (35094 bytes)

  • TIE DOWN BRACKETS  Front or Rear (Click for instructions)

  • CONVERTIBLE TOP TOPPER FOR SITTING ON ($300)
  • REPRODUCTION FIBERGLASS HOOD.

inside hood.jpg (21945 bytes)

PLEASE NOTE: Prices above are all in U.S. Dollars and do not include shipping. Please contact me with your location for exact shipping costs or for more information about these or other items.  And once again, if what you're looking for is not listed above, then please email or call with your desired list, and I will check it off against what I have and give you the best prices:

GORD
AMPHICAR.CA

3860 CARLYON LINE
SEVERN ONTARIO, CANADA L3V 0W8
Tel. 1-705-327-2820
Email:
gord@amphicar.ca

UPDATED 9/9/2009


Back to Vendor Listing

 

 

 

 

 

 

 

 

 

 

For Sale - Amphicars Videos & Postcards

Amphicar Videos
Full coverage of the 2002 and 2001 Southeast Swim-Ins at the Mt. Dora, Florida Antique Boat Festival  Plus, Amphicars at the 2000 Cypress Gardens Antique Boat Show. An hour of cool stuff including: Original Owner interviews, Hugh Gordon Interview, Alternative Amphibians, Amphicars on TV News and Spectacular Wooden runabouts. VHS tape.
Price: U.S. and Canada: Only $9. All other locations: $24.
Combined 1999 & 2000 Amphicar Video
Enjoy those 1999 and 2000 Amphicar Southeast Swim-Ins at the Mt. Dora, Florida Antique Boat Festival all over again, or even if you couldn't make it.  VHS tape also includes many other Amphicar related segments.
Price: U.S. and Canada: Only $10. All other locations: $24.
Amphicar Postcard
I have a limited supply of the famous original 9x6" Daytona Beach Amphicar postcard from the 1980's often seen on eBay. Just $5.00.
daytona.jpg (88601 bytes)
To order, send check or postal money order to:

Peter Fredsall
149 Nautical Drive
South Daytona, FL 32119.

 

[9/7/2002 rev]


Back to Vendor Listing

 

 

 

 

 

 

 

 

 

 

Services - Amphicar transmission repair!

MIDWEST AMPHICAR

Rebuilds Starting at $1800.00

Contact Dave at 815-910-5502.

Visit www.midwestamphicar.com for transmission pictures...


Does your trans look like this?


Back to Vendor Listing
 

 

 

 

 

 

 

 

 

 

 

 

TIPS FOR PROSPECTIVE WEB TOED MOTORISTS

Other popular places for buying and selling Amphicars, Amphicar parts, collectibles and whatnots are eBay and Hemmings Motor News

You should also be aware that even though you may have seen a few cars advertised for boat-loads of cash, it DOES NOT mean they are getting that price! We have seen those overpriced cars too, and they rarely (if ever) sell at even close to that price. Do your homework by asking a club member or restoration expert what they believe the car may be worth. It could save you that preverbal boat-load of cash you will need to restore it.


Back to Vendor Listing

 

Copyright ©2002-2006 International Amphicar Owners Club. All rights reserved.
Last updated June 26, 2017